Coldsupply.com


Specializing in providing commercial refrigeration
parts and supplies.
 
 


Manufacturer List



 
   


Cabinet Hardware

 
Equipment Pull Handles Stainless Cabinet Hinge
Plastic Recessed Door Handles Stainless Flag Hinge
Cabinet Knobs Stainless Steel Latch Hinge
Stainless Steel Cabinet Hardware Drawer Sliding Hardware
Specialty Locks Heavy Duty Drawer Slides
Security Lock Stainless Steel Drawers
Magnetic Catches Bearings
Drawer And Door Catch Hardware Home Page
Continuous Stainless
Steel Hinge

Equipment Handles
 


 




 

Equipment Pull Handles

     Model No.            Item

A 0572000004 Nylon Pull Handle
B 0574000004 Die-cast Pull Handle
C 0576000004 Stainless  Steel Pull Handle
D 7502000801 Stainless Steel Thumbscrew
 


 

 

 

 

 

 





 

EQUIPMENT PULL HANDLES

  • Material is High Pressure Die-   Cast Zinc with Polished Chrome Finish.

A. 382 CLASSIC - Mounting holes are 4 1/2" (1) 4mm O.C., drilled and countersunk for No. 8 (4mm) screws.
B. 5001 HEAVY DUTY - Mounting holes are drilled and countersunk for 1/4" (6mm) screws.
C. 573 OFFSET - Mounting Holes are 5" (127 mm) O.C., drilled and tapped for 1/4 -20 screws.
D. 578 LARGE OFFSET -Mounting holes are 5" (127mm) O.C., drilled and tapped for 5/16  18 screws.

 

  


 

 

 

 

 

  



 

 

7308 SERIES STAINLESS STEEL TUBULAR HANDLES

 

915 SERIES DECORATOR HANDLES
Heavy duty, 7/8' (22mm), #304 stainless steel tubing with #4 satin finish Heavy duty aluminum handle with heat-resistant nylon bases.
Available with or without heat-resistant glass reinforced polyester resin insulators. Flexible black vinyl insert conceals screw holes.
Provided with 1/4 -20threaded screw holes. Styling complements Kason Hinges
Three standard sizes. Custom lengths available. Front-mount and dual-mount models. Duck-mount models has threaded bushings for treaded mounting.
  Mounts with 10-32 x1-3/4 flat head screws and 10-3/4' flat head screws and 10-32 hex jam nut
  Custom lengths to order

7308 SERIES TUBULAR HANDLES & INSULATORS

MODEL NO.            DESCRIPTION                  LENGTH

7308000001 Stand-off Insulator N/A
7308000003 Handle Only 11-5/8"(295mm)O.A  10-3/4"(273mm) O.C.
7308000004 Handle w/Insulators 11-5/8'(295mm) O.A. 10-3/4' (273mm) O.C.
7308000005 Handle Only 12-7/8' (372mm)O.A. 12' (305mm) O.C.
7308000006 Handle w/Insulators 12-7/8' (372mm)O.A. 12" (305mm) O.C.
7308000007 Handle Only 18-7/8' (479,,) O.A. 18" (457mm) O.C.
7308000008 Handle w/Insulators 18-7/8'(479mm) O.A. 18'(457mm) O.C.
 

 

915 SERIES DECORATOR HANDLES

MODEL NO.              DESCRIPTION                     LENGTH

0915000054

Dual Mount

12-7/8' (327mm) O.A.   10-5/8' (270mm) O.C.

0915000055

Dual Mount

12-7/8 (327mm) O.A.   10-5/8' 270mm) O.C.

0915000006

Front Mount - Steel Screws

7-13/16' (198mm) O.A.   6' (127mm) O.C.

0915000011

Front Mount

12-7/8' (327mm) O.A.   10-1/2' (267mm) O.C.

0915000022

Front Mount - Three Mounting Holes

23-3/8' (594mm) O.A.   2, 10-1/2' (267mm) O.C.


Stainless Steel Equipment Handles

  


916 SERIES - STAINLESS STEEL HANDLES

MODEL NO.           LENGTH

0916002087 20--7/8' (530mm) O.A. 20-1/8' (511mm) O.C.
0916002656 26-9/16' (675mm) O.A. 25-13/16 (656mm) O.C.

7321 SERIES - STAINLESS STEEL HANDLES

MODEL NO.                     LENGTH

73210000041637 17-7/8" (454mm) O.A.      16-3/8" (416mm)  O.C.
73210000041887 20-3/8" (518mm) O.A.      18-7/8 (480mm) O.C.
73210000042637 27-7/8' 708mm) O.A.        26-3/8" (670mm) O.C.


 




        Recessed Door Handles

7310 Series Recessed Pull Handles

 
Ref Model No. Description Mounting
A 7310000004 Beveled Edge

           

Thru Studs, Lock Nuts Provided
B 7310000006 Flush For Welding
C 7310000008 Full Grip, Beveled Edge Thru Studs, Lock Nuts Provided
D 7310000010 Round Full Grip Thru Studs Thru Studs, Lock Nuts Provided

Not Shown

 7310000011    Beveled Edge No Studs For Welding

 


 

 

 

 

 

 

 

  


How To Measure Gaskets


Measure Gasket Picture
 


How To Measure Offsets